‰  NOW 10 WPM  ‰  TEXT IS FROM SEPTEMBER 2015 QST  PAGE 32  ‰

COUPLER.  WHEN THE EPOXY HAS SET, PIN ALL THE ASSEMBLIES IN PLACE TO THE
BOOM.  USE TINY 1/2 INCH FINISHING NAILS AS PINS.  DRILL HOLES SLIGHTLY
SMALLER THAN THE NAIL DIAMETER IN THE BOTTOM SIDE OF EACH T.  THE HOLES
SHOULD EXTEND INTO THE BOOM.  THE HOLES SHOULDNT BE TOO SMALL, SINCE LITTLE
RESISTANCE IS NEEDED TO KEEP THE PIN IN PLACE.  TAKE CARE NOT TO ALLOW THE
‰  END OF 10 WPM TEXT  ‰  QST DE W1AW  ƒ