=  NOW 10 WPM  =  TEXT IS FROM MARCH 2021 QST  PAGE 31  =

PVC TUBE THE DIRECTOR END PRESS ON THE PVC CAP.  NEAR THE EDGE OF THE CAP,
DRILL A 1/4 INCH HOLE ALL THE WAY THROUGH THE CAP AND TUBE.  TAKE CARE TO
ENSURE THAT THE BIT GOES STRAIGHT THROUGH THE MAXIMUM DIAMETER OF THE PVC
TUBE.  REMOVE THE CAP AND USE A DREMEL TOOL OR HACK SAW TO CUT DOWN TO THE
HOLE TO FORM A DEEP NOTCH ON BOTH THE CAP AND TUBE.  NEXT, MEASURE 7R1
=  END OF 10 WPM TEXT  =  QST DE W1AW  <