‰  NOW 13 WPM  ‰  TEXT IS FROM JANUARY 2017 QST PAGE 44  ‰

TILT OVER POST AT THE TOP, WHICH PREVENT LATERAL MOTION.  A MECHANICAL
WINCH ON THE TILT OVER SECTION CAN LOWER THE MAST ASSEMBLY AND PAYLOAD ONCE
THE RETAINING SAFETY BOLT IS REMOVED.  THE BASE OF THE TILT OVER ASSEMBLY
SLIDES INTO A MATING SQUARE SLEEVE THATS BURIED IN A VERY DEEP HOLE
SURROUNDED BY CONCRETE.  TO DISASSEMBLE THE ANTENNA AND MAST SYSTEM, THE
MAST IS LOWERED TO ITS DOCKED HEIGHT, THE SAFETY RETAINING BOLT IS REMOVED,
AND THE MAST TILTED OVER.  THE FOLDING HEXBEAM ANTENNA AND ROTATOR ARE
ƒ  QST DE W1AW  ‰
REMOVED AT GROUND LEVEL AND STOWED.  THE PIVOT BOLT FOR THE MAST IS
REMOVED, AND THE ENTIRE MAST SECTION WITH THE WINCH IS DISCONNECTED FROM
THE TILT SECTION AND STOWED.  THIS MAST ASSEMBLY IS THE HEAVIEST ASSEMBLY,
AND WEIGHS ABOUT 50 POUNDS.  FINALLY, THE TILT OVER ASSEMBLY IS PULLED OUT
OF ITS MATING SQUARE SLEEVE IN THE GROUND AND STOWED.  VOIL.  NOTHING IS
LEFT BUT A SQUARE, ALUMINUM LINED, 3 INCH HOLE IN THE GROUND THAT IS THEN
‰  END OF 13 WPM TEXT  ‰  QST DE W1AW  ƒ