‰  NOW 13 WPM  ‰  TEXT IS FROM FEBRUARY 2020 QST PAGE 30  ‰

CONFIGURATION PANEL SEE FIGURE 4, TURN ON D STAR MODE.  ON THE DISPLAY
TYPE, PRESS THE DOWN ARROW AND SELECT OLED TO TURN ON THE PIHAT OLED
DISPLAY.  ON THE GENERAL CONFIGURATION PANEL SEE FIGURE 5, SET THE NODE
CALL SIGN TO YOUR D STAR CALL SIGN.  STEP 3 SET YOUR D STAR RADIO FREQUENCY
TO WHATEVER YOU WILL USE TO COMMUNICATE WITH THE HOTSPOT ONCE IT IS
CONFIGURED.  THIS FREQUENCY SETTING IS FOR COMMUNICATION BETWEEN THE PI
STAR AND THE LOCAL RADIO MOST PISTAR HATS ONLY COMMUNICATE ON UHF.  SET UP
ƒ  QST DE W1AW  ‰
LATITUDE AND LONGITUDE FOR YOUR LOCATION.  SET YOUR TOWN AND COUNTRY, AND
SET THE RADIO/MODEM TYPE TO STM32 DVM / MMDVM HS RASPBERRY PIHAT GPIO VIA
THE DROPDOWN SELECTION.  THIS IS THE SETTING FOR THE PIHAT I USED.  IF YOU
ARE WORKING WITH A DIFFERENT PIHAT, CHECK THE DOCUMENTS THAT COME WITH IT.
SET THE NODE TYPE TO PUBLIC IF OTHER RADIOS WITH DIFFERENT CALL SIGNS WILL
BE USING THIS HOTSPOT.  YOU MOST LIKELY CAN LEAVE THE APRS HOST SET TO THE
‰  END OF 13 WPM TEXT  ‰  QST DE W1AW  ƒ