‰  NOW 13 WPM  ‰  TEXT IS FROM MAY 2019 QST PAGE 63  ‰

AND 40 HZ AT 15 MHZ.  I FOUND A PROGRAM THAT FEATURED A SOFTWARE ADJUSTMENT
AT 10 MHZ, BUT THAT STILL LEFT AN ERROR FOR ME AT 15 MHZ.  I OPENED THE
PEGASUS AND FOUND THE ONLY ADJUSTABLE OSCILLATOR IN THE SECOND LO WITH A
FREQUENCY OF 14R8475 POSTED ON THE TOP OF THE TEMPERATURE COMPENSATED
CRYSTAL OSCILLATOR TCXO.  BEFORE ADJUSTING, I MEASURED THE FREQUENCY OF THE
TCXO WITH MY FREQUENCY COUNTER AND GOT A READING OF 14R847R460, WHICH WAS
ABOUT 40 HZ LOW THE SAME AS MY 15 MHZ READING.  I ADJUSTED THE OSCILLATOR
ƒ  QST DE W1AW  ‰
WITH THE COUNTER TO 14R847R500 AND THEN PERFORMED THE CHECK WITH WWV ON 10,
15, AND 20 MHZ WITH NO ERRORS.  THE CHECK WAS CORRECT ON BOTH LOWER AND
UPPER SIDEBAND.  AFTER THE ADJUSTMENTS, IVE GOTTEN BETTER AUDIO REPORTS AND
MY PEGASUS IS BACK ON FREQUENCY.  I CAN NOW CHECK MY EQUIPMENT AND OTHERS
VERY QUICKLY WITH MY MULTIMETER IN THE HZ MODE WITHOUT HAVING TO OPEN THE
CASE.  I WOULD CAUTION AGAINST TURNING OR ADJUSTING ANY CONTROL WITHOUT
‰  END OF 13 WPM TEXT  ‰  QST DE W1AW  ƒ