‰  NOW 13 WPM  ‰  TEXT IS FROM AUGUST 2019 QST PAGE 50  ‰

MAKE A CONTACT, AND THEN AFTER A PERIOD OF INACTIVITY, IT STARTS SCANNING
AGAIN BETWEEN THE MODES.  WHEN YOU ARE ON THE CONFIGURATION PAGE, YOU CAN
SCROLL DOWN TO SET UP OR CHANGE YOUR INFORMATION, SUCH AS YOUR CALL SIGN
AND YOUR DMR ID.  ITS ALSO WHERE YOU SELECT YOUR REFLECTORS FOR THE
ACTIVATED MODES, AS SHOWN IN FIGURE 9.  IN THIS EXAMPLE, I HAVE TWO
ACTIVATED MODES, D STAR ON REF001 C AND FUSION ON FCS003 /90.  IN THE
ACCOMPANYING VIDEO SEE THE LINK AT THE END OF THIS REVIEW, I DEMONSTRATE
ƒ  QST DE W1AW  ‰
SCANNING BETWEEN THE TWO MODES.  EVERY TIME YOU CHANGE MODES, REFLECTORS,
OR ANYTHING ELSE, YOU HAVE TO CLICK ON APPLY CHANGES, AND IT WILL TAKE A
MOMENT ABOUT 15 SECONDS BEFORE ITS EFFECTIVE.  YOU CAN UPDATE THE SOFTWARE
PACKAGE WITH ONE CLICK AT THE TOP OF THE DASHBOARD SCREEN.  NEX GEN ALSO
RECOMMENDS THAT YOU DO A BACKUP UPON RECEIVING THE XD4.  THIS IS VERY EASY
WITH PI STAR SELECT BACKUP/ RESTORE AT THE TOP OF THE CONFIGURATION SCREEN,
‰  END OF 13 WPM TEXT  ‰  QST DE W1AW  ƒ