‰  NOW 20 WPM  ‰  TEXT IS FROM JANUARY 2016 QST  PAGE 39‰

SIZE THAT WHEN FOLDED BACK ALONG ITS INSULATION CAN JUST BE FORCED INTO THE
PLUG HOLES, AS SHOWN IN FIGURE 7.  THEN PUT THE RECEIVER IF PLUG OVER IT TO
HOLD THE CENTER WIRE IN PLACE.  THESE SOCKETS ARE QUITE STURDY AND YOU ARE
UNLIKELY TO DAMAGE THEM BY PUSHING IN WIRES UNLESS YOU ARE REALLY CARELESS.
FOR CONNECTING TO A BANANA PLUG, FIT A SHORT PIECE OF 1/8 INCH TUBING, AS
SHOWN IN FIGURE 8, AND SOLDER TO THE TUBING.  USE A JEWELERS SAW TO PRODUCE
3/8 INCH LONG PIECES.  SOLDERING DIRECTLY TO THE BANANA PLUGS WILL
PERMANENTLY RUIN THE BANANA PLUGS.  SOLDERED BANANA PLUGS ARE PROBABLY THE
MOST COMMON IRREVERSIBLE MODIFICATION FOUND ON COMMAND SETS.  COVERING THE
BANDS  THE 3 6 AND 6 9 MHZ RECEIVERS ALREADY COVER HAM BANDS, AS DO THE 3 4
AND 7 9R1 MHZ TRANSMITTERS.  THE 4 5R3 MHZ TRANSMITTER CAN ALSO WORK THE
‰  END OF 20 WPM TEXT  ‰  QST DE W1AW  ƒ