=  NOW 25 WPM  =  TEXT IS FROM OCTOBER 2021  QST  PAGE 39  =

METER ENABLE POSITION.  TO MEASURE POWER, PLACE THE TUNE/BYPASS SWITCH IN
BYPASS, THE METER ENABLE/OPERATE SWITCH IN THE METER ENABLE POSITION, AND
THE SWR/PWR SWITCH IN THE PWR POSITION.  ROTATE THE METER SET CONTROL TO 20
W FOR A 20 W FULLSCALE READING, 5 W FOR A 5 W FULLSCALE READING, AND 1 W
FOR A 1 W FULLSCALE READING.  AS THE METER IS ONLY MARKED FROM 0 TO 5, YOU
NEED TO MULTIPLY THE METER READING BY 4 FOR THE 20 W SETTING, AND DIVIDE BY
5 FOR THE 1 W SETTING.  TO MEASURE SWR, PLACE THE TUNE/BYPASS SWITCH IN
BYPASS, THE METER ENABLE/OPERATE SWITCH IN THE METER ENABLE POSITION, AND
THE SWR/PWR SWITCH IN THE PWR POSITION.  APPLY RF POWER AND ADJUST THE
METER SET CONTROL FOR A FULLSCALE READING.  THEN SET THE SWR/PWR SWITCH TO
SWR TO READ SWR.  NOTE THAT THE SWR SCALE IS ONLY MARKED UP TO A 3 1 SWR
ABOUT 2/3 OF THE SCALE.  TO USE THE ANTENNA TUNER, SET THE TUNE/BYPASS
SWITCH TO TUNE, THE METER ENABLE/OPERATE SWITCH TO METER ENABLE, AND THE
=  END OF 25 WPM TEXT  =  QST DE W1AW  <