‰  NOW 35 WPM  ‰  TEXT IS FROM JUNE 2015 QST  PAGE 58‰

TO THE RIGHT OF HE DISPLAY ARE TWO RED PUSHBUTTONS.  WHEN PRESSED
MOMENTARILY, THE TOP PUSHBUTTON V/MEM/SAV TOGGLES BETWEEN THE VFO AND A
MEMORY CHANNEL.  TO STORE A MEMORY CHANNEL, ROTATE THE VFO KNOB TO THE
DESIRED FREQUENCY.  THEN PRESS AND HOLD THE V/MEM/SAV BUTTON FOR 3 SECONDS
TO STORE THE FREQUENCY IN THE NEXT AVAILABLE MEMORY CHANNEL.  WHEN PRESSED
MOMENTARILY, THE BOTTOM PUSHBUTTON RIT/SET TOGGLES BETWEEN THE RIT RECEIVER
INCREMENTAL TUNING AND THE SPEED OF THE BUILT IN ELECTRONIC KEYER.  WHEN
RIT IS ENGAGED, THE RECEIVED FREQUENCY CAN BE MOVED UP TO 82 KHZ HIGHER OR
LOWER THAN THE TRANSMITTING FREQUENCY BY ROTATING THE TUNING KNOB, USEFUL
FOR SPLIT OPERATION.  WHEN THE RIT/SET BUTTON IS PRESSED AND HELD FOR TWO
SECONDS, THE CW SPEED IS DISPLAYED AND CAN BE ADJUSTED BY ROTATING THE
TUNE/STEP KNOB.  KEYING IS SEMI BREAKIN, AND DELAY IS NOT ADJUSTABLE.  THE
FREQUENCY TUNING STEP IS SELECTED BY MOMENTARILY PRESSING THE TUNE/STEP
KNOB.  PRESS IT ONCE TO SELECT 10 HZ, PRESS IT AGAIN TO SELECT 100 HZ, AND
A THIRD PRESS SELECTS 1 KHZ STEPS.  PRESSING AND HOLDING THE KNOB FOR TWO
SECONDS SELECTS 100 KHZ STEPS.  THE REAR PANEL OFFERS A 1/8 INCH STEREO
PHONE JACK FOR CONNECTING AN EXTERNAL CW KEYER, STRAIGHT KEY, OR PADDLES
FOR THE INTERNAL KEYER.  IF A KEY OR PADDLE IS PLUGGED IN, THE KEYING
DEVICE IS AUTOMATICALLY DETECTED WHEN THE TRANSCEIVER IS TURNED ON.  THE
‰  END OF 35 WPM TEXT  ‰  QST DE W1AW  ƒ