=  NOW 35 WPM  =  TEXT IS FROM APRIL 2020 QST  PAGE 36=

VIEW IT IN THE DISPLAY PANE AND BEGIN WORKING WITH CONTROLS.  AFTER
POPULATING YOUR PAGES WITH CONTROLS, YOU CAN COMPILE AND TEST YOUR DESIGN
RIGHT IN THE EDITOR.  GRANTED, IT KNOWS NOTHING OF INPUT FROM YOUR SKETCH,
BUT YOU CAN TEST LOCATION AND OPERATION OF CONTROLS, THE SIZE OF TEXT, AND
THE COMMANDS YOUVE PROGRAMMED TO BE USED BY THE DISPLAY ITSELF BEFORE
TAKING THE TIME TO LOAD IT ON THE DISPLAY.  CLICK COMPILE ON THE QUICK
ACCESS BAR, THEN CLICK DEBUG AND CLICK ON YOUR BUTTON TO YOUR HEARTS
CONTENT.  YOU WILL NEED A MICROSD CARD TO LOAD YOUR DESIGN TO THE DISPLAY
ITSELF.  USE FILE TFT FILE OUTPUT TO COMPILE AND SAVE THE DESIGN TO THE
CARD.  WHEN THE DESTINATION FOLDER IS DISPLAYED, YOU CAN TURN OFF POWER TO
THE DISPLAY AND INSERT THE CARD IN THE SLOT ON THE DISPLAY.  WHEN YOU
SUPPLY POWER TO THE DISPLAY, IT WILL LOOK FOR THE DESIGN FILE AND TRY TO
LOAD IT.  THE DISPLAY SCREEN WILL SHOW THAT THE UPLOAD WAS SUCCESSFUL.
POWER DOWN, REMOVE THE CARD, AND POWER UP TO SEE YOUR DESIGN OR DESIGN
CHANGES.  AS FAR AS I KNOW, THE MICROSD CARD READER ON THE DISPLAY CAN BE
USED ONLY TO UPLOAD DISPLAY DESIGNS.  DETAILS ABOUT USING THE DISPLAY IN
THE SKETCH ARE ON THE WWW.  ARRL. ORG/ QST IN DEPTH WEB PAGE.  MORE PROJECT
RESOURCES, INCLUDING CODE AND PCB LAYOUTS, ARE AVAILABLE FROM THE AUTHOR AT
WWW. WW9JD. NET.  MICROPROCESSOR BOARD SELECTION AND PCB DESIGN  ONE OF MY
=  END OF 35 WPM TEXT  =  QST DE W1AW  <