‰  NOW 15 WPM  ‰  TEXT IS FROM AUGUST 2006 QST  PAGES 50 AND 98  ‰
SANDING IT OFF WITH MY BELT SANDER.  I ALSO HAD TO SAND THE BARBED PORTIONS
TO JUST A LITTLE SMALLER DIAMETER FOR A SNUG BUT NOT TOO TIGHT FIT IN THE
3/4 INCH ALUMINUM TUBING.  WITH A HOLE DRILLED THROUGH THE SIDE OF THE BARB
I RAN THE COAX UP THROUGH THE LOWER ELEMENT, AND OUT THROUGH THE HOLE IN
THE SIDE OF THE HOSE BARB.  AFTER DRESSING THE END OF THE COAX TO CREATE A
SHIELD LEAD AND A CENTER CONDUCTOR LEAD, THE COAX WAS PULLED BACK UNTIL THE
‰  FROM PAGE 98  ‰
K4DN/335 K4IKM/335 K4PB/336 K4QD/333 K4WSB/342 K4ZA/335 K5FNQ/341 K5NX/339
‰  END OF 15 WPM TEXT  ‚