‰  NOW 20 WPM  ‰
DISPLAY BOARD IS THE SMALLER OF THE TWO PC BOARDS AND NESTS ON TOP OF THE
MAIN BOARD.  FOLLOW THE MANUALS INSTRUCTIONS EXACTLY WHEN IT COMES TO
FITTING THIS BOARD.  IF YOU DONT, THE TINY PUSHBUTTON SWITCHES THAT
PROTRUDE FROM THE HOLES IN THE CASE MAY NOT LINE UP CORRECTLY.  ITS A REAL
HASSLE TO GO BACK AND TRY TO REFIT THE DISPLAY BOARD.  SO SLOW DOWN, READ
THE INSTRUCTIONS CAREFULLY AND DO IT RIGHT THE FIRST TIME.  WITH THE
INITIAL FITTING COMPLETE, THE NEXT STEP IS TO APPLY VOLTAGE TO THE COAXIAL
POWER CONNECTOR.  WHILE THE MANUAL SAYS THAT YOU CAN GO AS LOW AS 9 V DC, I
RECOMMEND THAT YOU USE 12 V DC FROM YOUR REGULATED BENCH SUPPLY.  INITIALLY
I TRIED USING 9 V FROM A WALL WART AND FOUND THAT WHILE THE COUNTER POWERED
‰  FROM PAGE 90  ‰
K4DZR 171 5 1 1,760 TN K8ET 756 2 2 1,742 MI NT4A 165 5 1 1,700 TN AB4ET
‰  END OF 20 WPM TEXT  ‰  QST DE W1AW  ƒ