‰  NOW 20 WPM  ‰
SEALANT IF YOU WISH.  ASSEMBLE THE CIRCUIT BOARD WHILE ALLOWING THE GLUE TO
DRY.  IF YOU CHOOSE VERO BOARD, SOLDER CAREFULLY.  I HAVE FOUND SOLDER
BRIDGES TO BE MUCH MORE LIKELY WITH VERO BOARD THAN WITH A PRINTED CIRCUIT.
REMEMBER THAT THE LED MUST BE SOLDERED ON THE BOTTOM OF THE BOARD.  DO NOT
MOUNT THE LED UNTIL YOU HAVE MADE SURE THAT EVERYTHING ELSE FITS TOGETHER
PROPERLY.  CHECK THE BOARD THOROUGHLY IN GOOD LIGHT BEFORE PROCEEDING.
BEFORE MOUNTING THE LED, MEASURE THE HEIGHT OF THE STANDOFF ON THE BOARD
MOUNTS.  THE LED SHOULD BE MOUNTED ON THE BOTTOM OF THE BOARD SO THAT THE
DISTANCE FROM TOP OF THE SMALL SHOULDER ON THE LED TO THE BOARD IS THE SAME
DISTANCE AS THE STANDOFF HEIGHT.  DO NOT PLACE THE 16C745 INTO ITS SOCKET
‰  FROM PAGE 74  ‰
WINNEBAGO CO KC9COI 108 FOND DU LAC CO W9GPI 90 MARATHON CO KB9UBR 79
‰  END OF 20 WPM TEXT  ‰  QST DE W1AW  ƒ