‰  NOW 25 WPM  ‰  TEXT IS FROM JULY 2007 QST  PAGES 38, 39 AND 74  ‰
FOIL STRIPS RUNNING EAST WEST AND MOST PARTS ORIENTED IN A NORTH SOUTH
DIRECTION, WIRE JUMPERS ARE USED TO CONNECT PARTS AS DESIRED.  BEFORE
PLACING PARTS ON THE BOARD, THE COPPER FOIL STRIPS ARE BROKEN BY REMOVING
FOIL TO ELIMINATE UNDESIRED CONDUCTING PATHS.  BEFORE PLACING PARTS ON
EITHER THE PC OR THE VERO BOARD, USE THE BOARD AND THE OTHER PARTS TO MARK
THE LOCATION AND MOUNTING HOLES ON YOUR ENCLOSURE.  PAY PARTICULAR
ATTENTION TO THE PLACEMENT OF THE HOLES THROUGH WHICH THE USB JACK AND LED
WILL PROTRUDE.  MOUNTING HOLES FOR THE BOARD SHOULD BE PLACED SO THAT THE
USB JACK WILL PROTRUDE ONLY SLIGHTLY FROM THE SURFACE OF THE ENCLOSURE.
CUTTING THE RECTANGULAR HOLE FOR THE USB JACK WILL PROBABLY BE THE MOST
DIFFICULT SINGLE TASK.  YOU CAN DRILL HOLES FOR THE OTHER JACKS.  MOUNT THE
JACKS AND SPEAKER FIRST.  YOU CAN GLUE THE SPEAKER AS I DID WITH SILICONE
‰  FROM PAGE 74  ‰
EAST CENTRAL N9TBM 164 RACINE/KENOSHA WB9USI 153 BADGER EMERG NET KE9VU 144
‰  END OF 25 WPM TEXT  ‰  QST DE W1AW  ƒ