Antenna and Cable analyzers (VNA)

Complex measurements Make it easy

Rigexpert Antenna and Cable analyzers (VNA)

R&D experts and experienced radio amateurs design our Antenna and Cable analyzers.
They are not the only reliable and highly accurate tools for adjusting your radio and microwave devices and their systems.
RigExpert VNA is a very simple and convenient device for working including in the fields.

  • Checking and adjusting antennas
  • Сable Length and Velocity Factor measurements
  • 1/4-λ, 1/2-λ coaxial stubs setup
  • Finding cable fault
  • Measurement of other RF elements parameters
  • Factory calibration
  • Intuitive interface and built-in Helper at the push of a button
  • A built-in ZOOM for any detail of charts
  • 16-hour runtime, one charge
  • Bluetooth LE for communication with mobile app
  • Operation temperature from -20° to 55°C
Antenna and Cable analyzers (VNA)
HF Analyzers

AA-35 ZOOM

0.06 to 35 MHz
300.00 USD
Specifications
Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing characteristics of an antenna before and after specific events (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads

Frequency range

0.06 to 35 MHz

Frequency entry

1 kHz

Measurement for systems

25, 50, 75, 100 Ohm

SWR measurement range

1 to 10 in chart modes, 1 to 100 in numerical modes

R and X range

0…1000, -1000…1000 in chart modes, 0…10000, -10000…10000 in numerical modes

Display modes

R, X chart, 100 points, SWR chart, 100 points

RF output

Connector type: UHF (SO-239), Output power: +13 dBm (at 50 Ohm load), Output signal shape: square

Power

Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Two 1.2V Ni-MH batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

320×240 color TFT display, 6x3 keys on the water-proof keypad, USB connection to a personal computer

Accessories inside the box

Alkaline batteries, Soft case, USB cable, User’s manual

Dimensions

103 mm x 207 mm x 37 mm (4.1 in x 8.1 in x 1.4 in)

Operating temperature

0…40 °C (32…104 °F)

Weight

310 g (10.9 Oz) w/o batteries

GTIN-13

4820185420105

Note

Мade in Ukraine

Close specifications

More

AA-55 ZOOM

0.06 to 55 MHz
380.00 USD
Specifications
Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing characteristics of an antenna before and after specific events (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads

Frequency range

0.06 to 55 MHz

Frequency entry

1 kHz

Measurement for systems

25, 50, 75, 100 Ohm

SWR measurement range

1 to 10 in chart modes, 1 to 100 in numerical modes

R and X range

0…1000, -1000…1000 in chart modes, 0…10000, -10000…10000 in numerical modes

Display modes

R, X chart, 100 points, Return loss chart, 100 points, Smith chart, 100 points, SWR at single or multiple frequencies, SWR chart, 100 points, SWR, return loss, R, X, Z, L, C at single frequency

RF output

Connector type: UHF (SO-239), Output power: +13 dBm (at 50 Ohm load), Output signal shape: square

Power

Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Two 1.2V Ni-MH batteries, type AA, Two 1.5V alkaline batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

320×240 color TFT display, 6x3 keys on the water-proof keypad, Menus and help screens in English (by default), Japanese, French, USB connection to a personal computer

Dimensions

103 mm x 207 mm x 37 mm (4.1 in x 8.1 in x 1.4 in)

Operating temperature

0…40 °C (32…104 °F)

Weight

310 g (10.9 Oz) w/o batteries

GTIN-13

4820185420099

Note

Specifications are subject to change without notice, Мade in Ukraine

Accessories inside the box

Alkaline batteries, RigExpert AA-55 ZOOM, Soft case, USB cable, User’s manual

Close specifications

More
VHF Analyzers

AA-230 ZOOM

0,1 to 230 MHz
480.00 USD
Specifications
Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing characteristics of an antenna before and after a specific event (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads
A built-in ZOOM capability makes graphical measurements especially effective

Frequency range

0.1 to 230 MHz

Frequency entry

1 kHz

Measurement for systems

25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm

SWR measurement range

1 to 10 in chart modes, 1 to 100 in numerical modes

R and X range

0…1000, -1000…1000 in chart modes, 0…10000, -10000…10000 in numerical modes

Display modes

Optional open-short-load calibration, R, X chart, 20 to 500 points, Return loss chart, 20 to 500 points, Smith chart, 20 to 500 points, SWR at single or multiple frequencies, SWR chart, 20 to 500 points, TDR chart (Time Domain Reflectometer), Сable tools (StubTuner, Cable Length, Impedance, Loss measurements)

RF output

Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square

Power

Four 1.2V Ni-MH batteries, type AAA, Four 1.5V alkaline batteries, type AAA, Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

290×220 color TFT display, 6x3 keys on the water-proof keypad, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), Japanese, USB connection to a personal computer

Dimensions

82 x 182 x 32 mm (3.2 x 7.2 x 1.3 in)

Operating temperature

0…40 °C (32…104 °F)

Weight

236 g (8.32 oz)

Accessories inside the box

Alkaline batteries, N Male SO-239 Female adaptor, Soft case, USB cable, User’s manual

GTIN-13

4820185420082

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

Stick 230

0,1 to 230 MHz
330.00 USD
Specifications
Checking and adjusting antennas
Measurement of all main parameters of cables, feedlines, filters, and other
16 hours of work from one charge
Bluetooth
Compact and lightweight
Splash and dustproof case
Using both in the home and in the field

Frequency range

0.1 to 230 MHz

Frequency entry

1 kHz

Measurement for systems

12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm

SWR measurement range

1 to 10 in chart modes, 1 to 100 in numerical modes

R and X range

0… 10000, -10000… 10000

Display modes

Multé (a quick check of multiband antennas), SWR chart, 100 points, SWR, Return loss, R, X, Z, L, C, magnitude and phase angle at one frequency

RF output

Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square

Power

One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger

Interface

2 × 3 keys on the waterproof keyboard, Menus and help screens in English (by default), Japanese, Monochrome electronic paper display, 200 × 200, USB connection to a personal computer, v.4.2 BLE Single Mode, Class B

Dimensions

185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)

Operating temperature

-15° … 40 ° C (5 … 104 ° F)

Weight

185 grams (6.5 Oz) with battery

Accessories inside the box

Lanyard, Quick start guide, USB cable

GTIN-13

4820185420259

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More
UHF Analyzers

Stick 500

0,1 to 500 MHz
400.00 USD
Specifications
Checking and adjusting antennas
Measurement of all main parameters of cables, feedlines, filters, and other
High contrast E Ink display
16-hour runtime, one charge
Bluetooth
Compact and lightweight
Splash and dustproof case
Using both in the home and in the field

Frequency range

0.1 to 500 MHz

Frequency entry

1 kHz

Measurement for systems

12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm

SWR measurement range

1 to 10 in chart modes, 1 to 100 in numerical modes

R and X range

0… 10000, -10000… 10000

Display modes

HAM (a quick check of single band antenna), Multé (a quick check of multiband antennas), OSL calibration mode, SWR chart, 100 points, SWR, Return loss, R, X, Z, L, C, magnitude and phase angle at one frequency

RF output

Connector type: UHF (SO-239), Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square

Power

One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger

Interface

2 × 3 keys on the waterproof keyboard, High contrast E Ink display, 200 × 200, Menus and help screens in English (by default), Japanese, v.4.2 BLE Single Mode, Class B

Operating temperature

-15° … 40 ° C (5 … 104 ° F)

Dimensions

185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)

Weight

185 grams (6.5 Oz) with battery

Accessories inside the box

Lanyard, Quick start guide, USB cable

GTIN-13

4820185420358

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

Stick Pro

0.1 to 600 MHz
480.00 USD
Specifications
Checking and adjusting antennas
Measurement of various parameters of cables, feedlines, filters, and other
color TFT, 220 * 220 pixels
intuitive interface and built-in helper
Bluetooth
16-hour runtime, one charge
Compact and lightweight
Splash and dustproof case
Using both in the home and in the field

Frequency range

0.1 to 600 MHz

Frequency entry

1 kHz

Measurement for systems

12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm

SWR measurement range

1 to 10 in chart modes, 1 to 100 in numerical modes

R and X range

0… 10000, -10000… 10000

Display modes

Multé (a quick check of multiband antennas), SWR chart, 100 points, SWR, Return loss, R, X, Z, L, C, magnitude and phase angle at one frequency

RF output

Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square

Power

One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger

Interface

2 × 3 keys on the waterproof keyboard, 290×220 color TFT display, Menus and help screens in English (by default), Japanese, USB connection to a personal computer, v.4.2 BLE Single Mode, Class B

Operating temperature

0…40 °C (32…104 °F)

Weight

185 grams (6.5 Oz) with battery

Dimensions

185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)

GTIN-13

4820185420280

Accessories inside the box

Quick-start guide, Neck strap, USB cable, N-type to UHF adapter

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

AA-650 ZOOM

0.1 to 650 MHz
770.00 USD
Specifications
Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing the characteristics of an antenna before and after specific events (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads
Built-in Helper at the push of a button
A built-in ZOOM for any detail of charts
Bluetooth LE for communication with mobile app

Frequency range

0.1 to 650 MHz

Frequency entry

1 kHz

Measurement for systems

25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm

SWR measurement range

1 to 10 in chart modes, 1 to 100 in numerical modes

R and X range

0…2000, -2000…2000

Display modes

Optional open-short-load calibration, R, X chart, 20 to 500 points, Return loss chart, 20 to 500 points, Smith chart, 20 to 500 points, SWR at single or multiple frequencies, SWR chart, 20 to 500 points, TDR chart (Time Domain Reflectometer), Сable tools (StubTuner, Cable Length, Impedance, Loss measurements)

RF output

Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square

Power

Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 1.5V alkaline batteries, type AA, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

320×240 color TFT display, 6x3 keys on the water-proof keypad, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), Japanese, Ukrainian, Polish, Spanish and German, USB connection to a personal computer

Operating temperature

0…40 °C (32…104 °F)

Weight

450 g (15.9 oz)

Dimensions

100 × 230 × 55 mm, (4 × 9 × 2 in)

Accessories inside the box

Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter

GTIN-13

4820185420297

Note

Specifications are subject to change without notice, Мade in Ukraine

NCAGE Code

A37ZJ

Close specifications

More

Stick XPro

0.1 to 1000 MHz
680.00 USD
Specifications
Checking and adjusting antennas
Measurement of various parameters of cables feedlines, filters, and other
1/4-λ, 1/2-λ coaxial stubs setup
Finding cable fault
Factory calibration
Сolor TFT display
User-friendly interface
USB Type-C for PC
Bluetooth
16-hour runtime, one charge
Pocket-size
Splash and dustproof case
Operation temperature from -20° to 55°C

Frequency range

0.1 to 1000 MHz

Frequency entry

1 kHz

Measurement for systems

12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm

SWR measurement range

1 to 10 in chart modes, 1 to 100 in numerical modes

R and X range

0… 10000, -10000… 10000

Display modes

HAM (a quick check of single band antenna), Multé (a quick check of multiband antennas), OSL calibration mode, R, X chart, Return loss chart, Single (measure SWR, |Z|, R, X, C, L, RL, Mag&Phase), SWR chart, TDR (distance to fault), Сable tools (StubTuner, Cable Length, Impedance, Loss measurements)

RF output

Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square

Power

One lithium-ion battery 3.7 V type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources, Сharge time: 3 hours when using a charger

Interface

2 × 3 keys on the waterproof keyboard, 290×220 color TFT display, Menus and help screens in English (by default), Japanese, USB connection to a personal computer

Operating temperature

-20°- 55°C (-4°-131°F)

Weight

185 grams (6.5 Oz) with battery

Dimensions

185 x 40 x 33 mm (7.3 x 1.6 x 1.3 inches)

Accessories inside the box

Quick-start guide, Neck strap, USB cable, N-type to UHF adapter

GTIN-13

4820185420365

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

AA-1500 ZOOM SE

0.1 to 1500 MHz
1000.00 USD
Specifications
Checking and adjusting antennas
Сable Length and Velocity Factor measurements,
1/4-λ, 1/2-λ coaxial stubs setup
Finding cable fault
Measurement of parameters of other RF elements
- Capacitors and inductors
- Transformers
- Traps
Built-in Helper at the push of a button
A built-in ZOOM for any detail of charts
Up to three alkaline or rechargeable batteries with voltage from 1.2V to 3.7V
Bluetooth LE for communication with mobile app

Frequency range

0.1 to 1500 MHz

Frequency entry

1 kHz

Measurement for systems

25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm

SWR measurement range

1 to 10 in chart modes, 1 to 100 in numerical modes

R and X range

0…2000, -2000…2000

Display modes

Cable tools (stub tuner, length & velocity factor, cable loss and characteristic impedance measurement, LC meter, Multé), Optional open-short-load calibration, R, X chart, Smith chart, SWR at single or multiple frequencies, SWR chart, TDR chart (Time Domain Reflectometer), User OSL: 10 profiles available

RF output

Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square

Power

Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 1.5V alkaline batteries, type AA, Three 3.7V LiPo batteries, 14200, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

6x3 keys on the water-proof keypad, 800×480 color Blanview® display, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), French, Italian, Japanese, Ukrainian, Portuguese, Spanish and German, USB connection to a personal computer

Operating temperature

0…40 °C (32…104 °F)

Weight

442 g (15.6 oz)

Dimensions

100 × 230 × 55 mm, (4 × 9 × 2 in)

Accessories inside the box

Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter

GTIN-13

4820185420310

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

AA-2000 ZOOM

0.1 to 2000 MHz
1200.00 USD
Specifications
Checking and adjusting antennas
Сable Length and Velocity Factor measurements,
1/4-λ, 1/2-λ coaxial stubs setup
Finding cable fault
Measurement of parameters of other RF elements
- Capacitors and inductors
- Transformers
- Traps
Built-in Helper at the push of a button
A built-in ZOOM for any detail of charts
Up to three alkaline or rechargeable batteries with voltage from 1.2V to 3.7V
Bluetooth LE for communication with mobile app

Frequency range

0.1 to 2000 MHz

Frequency entry

1 kHz

Measurement for systems

25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm

SWR measurement range

1 to 10 in chart modes, 1 to 100 in numerical modes

R and X range

0…2000, -2000…2000

Display modes

Cable tools (stub tuner, length & velocity factor, cable loss and characteristic impedance measurement, LC meter, Multé), Optional open-short-load calibration, R, X chart, Smith chart, SWR at single or multiple frequencies, SWR chart, TDR chart (Time Domain Reflectometer), User OSL: 10 profiles available

RF output

Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square

Power

Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 1.5V alkaline batteries, type AA, Three 3.7V LiPo batteries, 14200, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

6x3 keys on the water-proof keypad, 800×480 color Blanview® display, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), French, Italian, Japanese, Ukrainian, Portuguese, Spanish and German, USB connection to a personal computer

Operating temperature

0…40 °C (32…104 °F)

Weight

442 g (15.6 oz)

Dimensions

100 × 230 × 55 mm, (4 × 9 × 2 in)

Accessories inside the box

Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter

GTIN-13

4820185420310

Note

Specifications are subject to change without notice, Мade in Ukraine

Close specifications

More

AA-3000 ZOOM

0.1 to 3000 MHz
1300.00 USD
Specifications
Perfect for amateur, professional, and commercial radio
Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing characteristics of an antenna before and after a specific event (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads
Determining the parameters of other devices
Factory calibration
Big sunlight-readable Blanview® display
A built-in ZOOM for any detail of charts
Multilingual intuitive interface
Help at the push of a button with the built-in Helper
Storage of OSL calibration data for future use
Bluetooth LE for communication with mobile app

Frequency range

0.1 to 3000 MHz

Frequency entry

1 kHz

Measurement for systems

25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm

SWR measurement range

1 to 10 in chart modes, 1 to 100 in numerical modes

R and X range

0…2000, -2000…2000

Display modes

Cable tools (stub tuner, length & velocity factor, cable loss and characteristic impedance measurement, LC meter, Multé), Optional open-short-load calibration, R, X chart, Return loss chart, Smith chart, SWR at single or multiple frequencies, SWR chart, SWR, return loss, R, X, Z, L, C at single frequency, TDR chart (Time Domain Reflectometer), User OSL: 10 profiles available

RF output

Connector type: N, Output power: -10 dBm (at a load of 50 ohms), Output signal shape: square

Power

Max. 5 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used, Three 1.2V Ni-MH batteries, type AA, Three 3.7V LiPo batteries, 14200, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

6x3 keys on the water-proof keypad, 800×480 color Blanview® display, Bluetooth Specification v.4.2, LE, Menus and help screens in English (by default), French, Italian, Japanese, Ukrainian, Portuguese, Spanish and German, USB connection to a personal computer

Operating temperature

0…40 °C (32…104 °F)

Weight

442 g (15.6 oz)

Dimensions

100 × 230 × 55 mm, (4 × 9 × 2 in)

Note

Specifications are subject to change without notice, Мade in Ukraine

GTIN-13

4820185420372

Close specifications

More

IT-24

2.3 to 2.6 GHz
400.00 USD
Universal device for testing antennas and antenna feedlines of the 2.4 GHz ISM band
Quick tests of antennas and RF cables
Output power measurement of wireless access points and other transmitters
RF environment monitoring in spectrum analyzer mode
Suitable for telecommunication providers, service companies, and manufacturers
Compatible with Wi-Fi, WiMAX, ZigBee, and proprietary data transfer protocols
Equipped with SMA and RP-SMA connectors, liquid crystal display, keypad, and USB connector