‰  NOW 20 WPM  ‰  TEXT IS FROM DECEMBER 2017 QST  PAGE 50‰

SEEM A BIT SMALL, BUT EVERYTHING FITS.  THE BOARD IS MARKED WITH PLUS SIGNS
FOR THE POSITIVE LEAD OF THE TWO ELECTROLYTIC CAPACITORS, AND AS CUSTOMARY,
THESE CAPACITORS HAVE A BROAD STRIPE THAT MARKS THE NEGATIVE LEAD.  IT IS A
BIT OF A TIGHT FIT FOR THE TWO VARIABLE RESISTORS IF YOU TILT THEM AND
INSERT THE TIPS OF THE THREE LEADS FIRST, THEN YOULL BE ABLE TO CLICK IN
THE BODY CLAMPS ON THEIR ENDS.  WHEN FINISHED SOLDERING ALL THE PARTS INTO
THE BOARD, THERE WILL BE A 22 K RESISTOR LEFT OVER.  THE BOARD LOCATION
MARKED R11 WILL ALSO BE EMPTY.  MORE ON THIS LATER.  FINISHING TOUCHES
THERE ARE TWO SOLDER POINTS LABELED P1 AND P2.  A THIRD SOLDER POINT, NEAR
THESE TWO, IS NOT LABELED.  THE END OF THE ASSEMBLY INSTRUCTIONS HAS A
PARAGRAPH TITLED OPTION 2 THAT INCLUDES INSTRUCTIONS FOR SETTING JUMPERS TO
‰  END OF 20 WPM TEXT  ‰  QST DE W1AW  ƒ