Using FMT techniques in QST article
Displaying 1-1 of 1
| Jan 1st 2018, 14:00 | |
KO0YTotal Topics: 0 Total Posts: 0 |
In April of last year there was an article discussing frequency measuring techniques. One of these involved using a GPSDO and divider to generate a precise 1 kHz signal, then using Spectrum Lab to compare that with the radio-received signal. Unfortunately, the article didn't go into detail about this comparison. I have the hardware needed for this, an Anan 200D radio, and a copy of Spec Lab. I would like to get some help on how the 1 kHz signal is injected (a whip antenna is shown), and compared within Spec Lab. I've tried to email the author directly, but without success. thanks for help. Buck ko0y |
Displaying 1-1 of 1
