ARRL

Register Account

Login Help

Forum Home - Rules - Help - Login - Forgot Password
Members can access, post and reply to the forums below. Before you do, please first read the RULES.

IC-706MK2G question

Nov 23rd 2020, 18:21

K6JGA

Joined: Aug 17th 2020, 07:08
Total Topics: 0
Total Posts: 0
When in memory scan and stopped on a channel to receive my 706 will start scan after around ten seconds. It stops again after once around the memory but it is annoying. I thought I could find the issue in the manual but not yet. Any help appreciated.

Jim K6JGA
Nov 25th 2020, 11:46

WA8NVW

Joined: Apr 4th 1998, 00:00
Total Topics: 0
Total Posts: 0
NOTE first that this scan feature does NOT work like scanning on a VHF-FM Only mobile or portable radio. Chapter 5 of the manual covers Memory and Scan, and Section 7 covers Mode Settings. On page 53, Menu 21 Scan Resume, "... OFF: scan does not resume after stopping on a signal." This setting will hold the radio on the previously active memory frequency. The action applies to reception of all modes on both HF and VHF/UHF signals .

Back to Top

EXPLORE ARRL

Instragram     Facebook     Twitter     YouTube     LinkedIn