KPC-3 TNC KISS mode.... what am I doing wrong?
Displaying 1-3 of 3
| May 9th 2018, 19:26 | |
jclausenTotal Topics: 0 Total Posts: 0 |
Hello everyone, I have a KPC-3 that I am trying to use in KISS mode. I can access the TNC just fine with the com port baud rate set at 9600. HBAUD is set at 1200 ABUAD at 9600. When I enter KISS mode by typing INTFACE KISS and then RESET. It seems to go into KISS mode but it appears that the baud rate has changed. Transmissions from another TNC are garbage. Is there another setting for the KISS baud rate? What am I missing? Thanks in advance for the help!! John - AF5IR |
| May 9th 2018, 19:31 | |
W1VTSuper Moderator Total Topics: 0 Total Posts: 0 |
http://www.tapr.org/pipermail/nos-bbs/2006-September/000912.html Have you searched the TAPR archives? A lot of hams haven't played with packet modems for over a decade. Zak W1VT ARRL Senior Lab Engineer |
| May 10th 2018, 16:22 | |
jclausenTotal Topics: 0 Total Posts: 0 |
Thanks for the response, but I figured it out. I should have ignored it and kept going. |
Displaying 1-3 of 3
