ARRL

Secure Site Login

Forum Home - Rules - Help - Login - Forgot Password
Members can access, post and reply to the forums below. Before you do, please first read the RULES.

psk31

May 9th 2017, 20:32

0001529375H80

Joined: May 12th 2012, 23:56
Total Topics: 0
Total Posts: 0
Using fldigi psk31, I can receive qso from other hams communicatihg. My cq does not receive. Only uninteligable words. 20 meters KC6BIU
May 10th 2017, 00:06

AA6E

Joined: Apr 4th 1998, 00:00
Total Topics: 0
Total Posts: 0
The most common problem is over-modulation that causes splatter (very broad signal) that cannot be decoded by anyone else. If you are using a typical 100 W transceiver, make sure that your output power level is not more than about 30 W. (Turn down mic gain.) Shut off any voice processor. Make sure that your ALC light (if you have one) never comes on. This should minimize distortion and get you a clean signal on the air.

73 Martin AA6E
May 10th 2017, 11:29

0001529375H80

Joined: May 12th 2012, 23:56
Total Topics: 0
Total Posts: 0
Thank you

Back to Top