ARRL

Secure Site Login

Forum Home - Rules - Help - Login - Forgot Password
Members can access, post and reply to the forums below. Before you do, please first read the RULES.

Trouble with CH5 Code

Nov 10th, 22:28

AB1ZK

Joined: Apr 4th 1998, 00:00
Total Topics: 0
Total Posts: 0
I have had the PIC programming for beginners for awhile (2010).
While I have used the book to learn, I have not built any projects till now.

I can not get ch5 code to work. The lights do not blink. The message gives a code 202. I am just using the code off the CD.

Any idea's ? I have checked the circuit and the 5 volts is to the chip, but not action from the leds. The leds do light if the 470 ohm is connected to the 5 volt source.

Marc
Nov 11th, 11:20

W1VT

Joined: Apr 4th 1998, 00:00
Total Topics: 0
Total Posts: 0

I don't see that particular issue, but you may want to note the issues on the product notes page.

http://www.arrl.org/product-notes

Zack Lau W1VT
ARRL Senior Lab Engineer
Nov 11th, 15:04

AB1ZK

Joined: Apr 4th 1998, 00:00
Total Topics: 0
Total Posts: 0
Zack,

Thanks for the info. I tried the "work around" for programming and the problem is solved.

If possible, a "cleaner" solution with a permanent fix to the hardware (FET) would be best.

73,
Marc

Back to Top