ARRL

Secure Site Login

Forum Home - Rules - Help - Login - Forgot Password
Members can access, post and reply to the forums below. Before you do, please first read the RULES.

Replacing HAM-M with HAM 4 in Tri-Ex LM354

Jun 17th 2018, 18:19

W7FSI

Joined: Apr 4th 1998, 00:00
Total Topics: 0
Total Posts: 0
My HAM M has pretty much died as in No Brake whatsoever. I have a nice nearly new HAM 4 that I want to install when tower is Cranked down to 20 plus feet. Problem is I would like to leave the Tribander and 6 meter beam and 2 meter beam on the 16 foot mast in place on the Tower supported by the Thrust Bearing and Huh??....while I take out the old HAM-M and slip in the new HAM-4.

I am looking for helpful hints and tips on how to support and or brace the the Mast and Antennas while changing out the Rotor.....I am certain it can be done I just have not been able to find any help on line. I sure hope I can do this without removing three fairly large Beams and a double thickness mast.

Helpful suggestions, tips and any other help greatly appreciated.

Gary
W7FSI
Stanley, IDAHO

Back to Top