Kenwood TR-751A Memory?
Displaying 1-3 of 3
| Dec 17th 2011, 05:37 | |
AC0XUTotal Topics: 0 Total Posts: 0 |
I know how to set a TR-751A memory. I cannot find any indication in the user's guide about how to clear a memory. When the processor is reset, the memories are set to "------" (inactive). I would like to be able to reset a memory to inactive, without having to reset the processor (and losing all memory data). Anyone know how? Thanks- AC0XU Jim |
| Dec 20th 2011, 19:12 | |
WA0CBWTotal Topics: 0 Total Posts: 0 |
I have the same radio and I haven't found a way to "clear" a memory location. A little searching on the internet didn't turn up anything either. I have entered the same frequency in several memory locations to prevent it from stopping on a frequency I'm not interested in when it is scanning. Bill |
| Dec 20th 2011, 23:34 | |
KB0HAETotal Topics: 0 Total Posts: 0 |
I seem to remember that some older radios had no way to clear a memory (aside from a complete reset that would clear all memory). You could overwrite a memory. |
Displaying 1-3 of 3
