Circuit Board Construction Question
Displaying 1-2 of 2
| Mar 23rd 2012, 13:10 | |
WB1GCMJoined: Apr 4th 1998, 00:00Total Topics: 0 Total Posts: 0 |
One of our members has asked the following questions, please chime in if you know the answers: "I've been reading and reading about laser copy toner transfer to a blank PC board as etch resist. The types of paper listed in the 2010 ARRL handbook are no longer available, and various forums have old information on suitable paper but tales of woe about changes to paper formulations and problems removing the paper or damage to copier due to coatings. The reference in ARRLs web site search results is a couple of years old, so suspicious. Do you know of a currently available type of paper that will run safely in a laser printer? I've tried transferring by just soaking regular paper with acetone while it's pressed to the board, and I get a thin image. Do you know any details about what paper might work best for this method (versus using a hot iron)? I'll be using this with surface mount parts, so the spacing is pretty tight and resist repair with a pen might be prohibitive." Bob Allison WB1GCM ARRL Test Engineer |
| Mar 28th 2012, 15:07 | |
WA0CBWJoined: Apr 4th 1998, 00:00Total Topics: 0 Total Posts: 0 |
Have you tried Pulsar fx paper? They sell paper specifically designed for making printed circuit boards. Try pcfx.com. I have used their products and have had excellent results. I use an HP laser printer and a GC laminator (instead of the iron) and get excellent results. Frank will go out of his way to help you succeed. Bill - WA0CBW |
Displaying 1-2 of 2