ARRL

Forum Home - Rules - Help - Login - Forgot Password
Members can access, post and reply to the forums below. Before you do, please first read the RULES.

Kenwwod TR-7950 tone board

Jul 12th 2013, 22:27

KK4PQA

Joined: May 6th 2013, 17:35
Total Topics: 0
Total Posts: 0
I have a tone board installed on a Kenwood TR-7950 and I'm having trouble finding the installation instructions and dip switch position.

The board is about 2" x 1-1/4" and has a chip COM SPEC IC-110, I do not see any marking to identify the maker It has a 5 position dip switch. In the top left hand corner it has ON, then it is number 1-5 across the bottom. The Com Spec chart shows my repeater PL code as 00011, my educated assumption is that the switches would be down-down-down-up-up. It has three wires power, ground and a white wire that goes to the far right pin on J5. Does this sound right? I'm making simplex connections 25 miles away and the repeater is maybe 5 miles farther LOS. Any help will be appreciated, I'm anxious to host our Club's weekly net and so far my calls are relayed from a HAM with a 135 foot tower.
Jul 13th 2013, 00:45

W1VT

Joined: Apr 4th 1998, 00:00
Total Topics: 0
Total Posts: 0

Instructions for tone signaling equipment made by Communication Specialists

http://www.com-spec.com/instsht.htm

Zack Lau W1VT
ARRL Senior Lab Engineer

Back to Top