APRS-i gateway - 2m to Ethernet, no disk, no fan 10w
Displaying 1-2 of 2
| Jul 31st 2011, 05:34 | |
VE7ORATotal Topics: 0 Total Posts: 0 |
I am looking to provision a APRS-i gateway with as few components, as possible to get from ANT to Ethernet. Looking to mirror a similar setup I have between my David Research Vantage Pro 2 and the Internet. I use a HauteSpot HR-IXP-WIND WiFi Internet Weather Station Appliance .. this is a diskless, fanless, purpose build (Windows CE based, I think), controller that is rated at 10W, and draws about 4W. The device is 4"x4"x1" and wall mounted in the shack. Any thoughts I how I could do this? Perhaps there is a radio, with an Ethernet jack and a build in TNC .. or ? 73's Steve VE7ORA |
| Aug 1st 2011, 18:42 | |
WA1KLITotal Topics: 0 Total Posts: 0 |
Have you seen http://hackaday.com/2010/07/23/terminal-node-controller-in-a-router/ where the author re-purposed a Dlink DSL-502T router as a TNC for APRS-IS? |
Displaying 1-2 of 2
