ARRL

Forum Home - Rules - Help - Login - Forgot Password
Members can access, post and reply to the forums below. Before you do, please first read the RULES.

APRS-i gateway - 2m to Ethernet, no disk, no fan 10w

Jul 31st 2011, 05:34

VE7ORA

Joined: Jul 25th 2011, 02:33
Total Topics: 0
Total Posts: 0
I am looking to provision a APRS-i gateway with as few components, as possible to get from ANT to Ethernet.

Looking to mirror a similar setup I have between my David Research Vantage Pro 2 and the Internet. I use a HauteSpot HR-IXP-WIND WiFi Internet Weather Station Appliance .. this is a diskless, fanless, purpose build (Windows CE based, I think), controller that is rated at 10W, and draws about 4W. The device is 4"x4"x1" and wall mounted in the shack.

Any thoughts I how I could do this? Perhaps there is a radio, with an Ethernet jack and a build in TNC .. or ?

73's

Steve
VE7ORA
Aug 1st 2011, 18:42

WA1KLI

Joined: Apr 4th 1998, 00:00
Total Topics: 0
Total Posts: 0
Have you seen http://hackaday.com/2010/07/23/terminal-node-controller-in-a-router/ where the author re-purposed a Dlink DSL-502T router as a TNC for APRS-IS?

Back to Top