|Joined:||Wed, Mar 23rd 2011, 03:43||Roles:||N/A||Moderates:||N/A|
|I WOULD LIKE TO USE A STEPPER MOTOR IT AS A NORMAL MOTOR TO DRIVE A BUTTERFLY CAPACITOR||Apr 6th 2012, 19:47||1||1,820||on 6/4/12|
|Butternut HF6V Vertical antenna how much far from a fence?||Jan 2nd 2012, 03:44||2||2,386||on 10/1/12|
|I WOULD LIKE TO USE A STEPPER MOTOR IT AS A NORMAL MOTOR TO DRIVE A BUTTERFLY CAPACITOR||vassile52||on 6/4/12|
I did disassemble a SONCEBOZ 7165R001, small linear actuators using 2-phaqse stepping motors.
I would like to use the motor to drive a hv huge butterfly capacitor as a normal electric motor.
How to use it,pse?
I did find on goggle this info
ACP&D Limited - Small linear actuators
small linear actuators using 2-phaqse stepping motors
Power supply to the SYS1 board is 35v, driver is a DRV50 set at 4A, Sonceboz 6600R174 motor 4.7A, at the motor end connection I checked the two pairs of two wires one pair make G & GW the second pair make R & RW, with no load 360 + & 360 - works well, under load (cutting) -360 loses steps, first pair of wires read 3.9 to 4 volts, second pair read 5.8 to 6 volts same readings whether clock wise or anti clock.
Have tried the motor on a different axis output and works as it should no problem, the problem has to be in the driver board, been in touch with Roy @ DIYCNC sending it back for him to check out and repair.
What i would like to find out is what voltage readings should I be seeing on the two pairs of wires should they be the same? should one pair be different? I know one is Step the other is Dir but that is as far as my electrical knowhow goes.
Tnx for help!
73 de VA6POP
|Butternut HF6V Vertical antenna how much far from a fence?||vassile52||on 2/1/12|
|I have a Butternut HF6V vertical antenna.
I would like to place in a corner of my backyard.
How much far from a chain link fence?
Where to find the rule,pse?