The Deadline for the Third ARRL Homebrew Challenge Is Approaching
The ARRL has sponsored two Homebrew Challenges in the past, designed to test our members’ design and construction skills by making useful amateur gear at low cost -- and sharing their results with our members. Our first ARRL Homebrew Challenge, announced in QST for August 2006, required the construction of a 40 meter, 5 W voice and CW transceiver built for less than $50 of new parts. The Second Homebrew Challenge, announced in February 2009, resulted in a number of creative designs of low cost 50 W linear amplifiers to follow the transceiver -- two for about $30, as well as a multiband amplifier with many features for somewhat more. The deadline for the Third Homebrew Challenge is Tuesday, November 1, 2011.
For 2011, the ARRL has issued a challenge to build a transceiver in celebration of the (slow) return of sunspots. This challenge will be in two parts and hams can enter either or both options:
- Option 1: A single band 25 W SSB and CW transceiver for 10 or 6 meters, with a prize of $200.
- Option 2: A 25 W SSB and CW transceiver that can be switched between 10 and 6 meters, using one or two switches, with a prize of $300.
Instead of challenging entrants to make the transceiver at the lowest cost, the ARRL will instead challenge builders to provide the highest quality, best performance and most features within the cost target of $150 for Option 1 and $200 for Option 2. In addition to the cash prize, the winners of these challenges will have articles describing their designs in QST and will receive the usual page rate for the published articles. Additional entrants who meet the minimum requirements -- and have interesting design features -- may also be considered for QST or ARRL Web articles.
Entries for either option must be received at ARRL Headquarters no later than November 1, 2011. To be considered, each entrant must submit a working transceiver that is suitable for testing in the ARRL Lab and for on-the-air judging by the ARRL staff judges. Documentation required includes a priced parts list indicating the source and purchase price of each part, an article draft including a design description, construction hints, alignment instruction, block diagrams and schematic diagrams. Photographs may be provided, but final magazine photos will be taken by ARRL staff.
For more information, including specific requirements and evaluation criteria, please visit the ARRL Homebrew Challenge web page.