Yaesu Bluetooth Headset
Displaying 1-3 of 3
| Aug 12th 2014, 18:07 | |
m0pxsTotal Topics: 0 Total Posts: 0 |
Hi all, I am probably posting this in the wrong place so please bear with me. I have a new BH-2A bluetooth headset, but forgot to order the charger and cradle (hi hi) anyway went to order them and not one in the Countr (UK), Great (not). Anyway I realise that it needs a supply or 6v 1a, so I guess a standard 5v mobile charger will do the job, but my problem is that it has a connection on each side that would make the connection if I had the cradle, but I have no idea what the polarity is. Could be as simple as the +ve being on the same side as the + volume switch, but I have fallen for the obvious before. Anyone got any ideas ? Best 73 Phil M0PXS |
| Aug 12th 2014, 18:11 | |
m0pxsTotal Topics: 0 Total Posts: 0 |
Basically, I could really do for someone who has one with the required charger to just check the voltage and polarity with a meter if possible. Thanks in advance, Phil M0PXS |
| Jul 16th 2015, 18:04 | |
KD5DKQTotal Topics: 0 Total Posts: 0 |
Hello Phil, I just stumbled on your post and hope you've found an answer by now. If not, my cradle says Input and Output are both 6VDC 0.5 A while the AC adapter shows 6VDC 1.0 A. Center is positive. Hope this helps! 73 Mark KD5DKQ |
Displaying 1-3 of 3
