ARRL

Secure Site Login

K2HYD

Joined: Sat, Apr 4th 1998, 00:00 Roles: N/A Moderates: N/A

Latest Posts

Topic Author Posted On
2 Meter Slot-Cube Antenna (QST Jan 2019) K1AWC on 24/12/18
I've built one. Only problem I had is that I should have made the 1" pieces that connect the L's to the T's a bit shorter, or maybe I could have jammed the L's and T's closer together. I had about a 3/16in gap between L's and T's, and this pushed the vertical sections up against each other. I held them apart temporarily with a piece of scrap metal when mounting them to the PVC pipe (there was enough "give" in the whole assembly to allow this). Once mounted and held in place with screws and nuts I could remove the scrap metal piece and everything looks good.

Back to Top