ARRLWeb: General Rules for ARRL Contests on bands below 30 MHz (HF)

ARRL -- The national association for Amateur Radio

Find on this site...

Site Index

ARRL Member Login...

Quick Links...

Operating ActivitiesLicensingNews/BulletinsServicesEducationPublic ServiceSupportDonate to ARRLARRL Info

Text-only

General ARRL Rules

For All Contests

For Contests on Amateur Bands Above 50 MHz

General Rules - PDF Version

For All Contests [44,652 bytes, PDF file]

For Contests on Amateur Bands Above 50 MHz [29,236 bytes, PDF file]

For Contests on Amateur Bands Below 30 MHz [19,350 bytes, PDF file]

Contest Specific Information

Related Links

ARRL Products:
Low Power/QRP
(More)

ARRL's Low Power Communication -- Build and operate low-power radio gear-the QRP way! 3rd Edition.

MFJ 20-meter CW Cub Transceiver Kit -- Enjoy countless hours operating this tiny high performance QRP Transceiver.

The ARRL Antenna Designer's Notebook -- Now Shipping! -- A rarely presented view of antenna design-from Imagination to Aluminum!

ARRL's Wire Antenna Classics -- An entire book devoted to wire antennas, from the simple to the complex.

ARRL's Low Power Communication with 40-meter CW Cub Transceiver Kit -- Build and operate low-power radio gear--the QRP way! 3rd Edition. Includes the 40-meter CW Cub Transceiver Kit.

General Rules for ARRL Contests on bands below 30 MHz (HF)

General Rules:
1. 1.1.See General Rules for All ARRL Contests.
2. 1.2.Cross-mode contacts are not permitted.
3. 1.3. The total transmitter output power per band for any high power entry in any category for an ARRL Contest is either 1500 Watts PEP or the maximum allowable power level established by the national licensing authority of your country, whichever is lower.
Entry Categories: The following categories are defined for ARRL contests on bands below 30 MHz. See the rules for each contest to determine which categories apply and whether additional categories exist for that contest.
1. 2.1.Single Operator: One person performs all transmitting, receiving, and logging functions as well as equipment and antenna adjustments.
  1. 2.1.1.Use of spotting assistance or nets (operating arrangements involving other individuals, DX-alerting nets, packet, Internet, multi-channel decoders such as CW Skimmer, etc) is not permitted.
  2. 2.1.2.Single-Operator stations are allowed only one transmitted signal at any given time.
  3. 2.1.3.Single Operators may be divided into subcategories based on power output:
    1. 2.1.3.1.QRP: 5-W PEP output or less.
    2. 2.1.3.2.Low Power: 150-W PEP output or less.
    3. 2.1.3.3.High Power: More than 150-W PEP output (see rule 1.3).
2. 2.2.Single Operator Unlimited: One person performs all transmitting, receiving, and logging functions as well as equipment and antenna adjustments. (Note: See rule 2.3.1.1)
  1. 2.2.1.Use of spotting assistance or nets (operating arrangements involving other individuals, DX-alerting nets, packet, multi-channel decoders such as CW Skimmer, etc) not physically located at the station is permitted.
    (Exception: spotting information obtained from any source outside the station boundary via a closed or dedicated communication link may not be used.)
  2. 2.2.2.Single Operator Assisted stations are allowed only one transmitted signal at any given time, not including transmissions on a spotting net.
3. 2.3.Multioperator: More than one person performs transmitting, receiving and logging functions, etc. Multioperator stations are divided into subcategories:
  1. 2.3.1.Multioperator, Single Transmitter: Stations are allowed only one transmitted signal at any given time.
    1. 2.3.1.1.In those contests that do not have Single Operator Assisted class, this category includes those single operators that use any form of spotting assistance such as from nets or packet.
    2. 2.3.1.2.Includes those that receive assistance with logging or relief operators, etc.
    3. 2.3.1.3.Limited to 6 band changes (maximum) in any clock hour.
      1. 2.3.1.3.1.The clock hour is from zero through 59 minutes.
      2. 2.3.1.3.2.Band changes are defined so that, for example, a change from 20 meters to 40 meters and then back to 20 meters constitutes two band changes.
    4. 2.3.1.4.Violation of the 6-band change rule or improper logging will result in an entry reclassification to the Multi-operator Multitransmitter class.
  2. 2.3.2.Multioperator, Two Transmitter:
    1. 2.3.2.1.A maximum of two transmitted signals at any given time, on different bands.
    2. 2.3.2.2.Each transmitter is limited to 6 band changes (maximum) in any clock hour. Unused band changes from radio one may not be transferred to radio two.
      1. 2.3.2.2.1.The clock hour is from zero through 59 minutes.
      2. 2.3.2.2.2.Band changes are defined so that, for example, a change from 20 meters to 40 meters and then back to 20 meters constitutes two band changes.
      3. 2.3.2.2.3.Violation of the 6-band change rule or improper logging will result in an entry reclassification to the Multioperator Multitransmitter class.
    3. 2.3.2.3.Both transmitters may work any and all stations; the second transmitter is not limited to working new multipliers only. However, a station may only be worked once per band regardless of which transmitter is used.
    4. 2.3.2.4.Each of the two transmitters must keep a separate, chronological log for the entire contest period.
    5. 2.3.2.5.The Cabrillo log must indicate which transmitter made each QSO in this category.
  3. 2.3.3.Multioperator Multi-transmitter:
    1. 2.3.3.1.A maximum of one transmitted signal per band at any given time. 2.3.3.2.Multioperator Multi-transmitter stations must keep a separate, chronological log for each band for the entire contest period.