Moving Callsign Certificates and Station Locations from One Computer to Another

If you have TQSL running on one computer (the source) and wish to set it up on a second computer (the destination), you must

Moving All Callsign Certificates and Station Locations to Another Computer
You can move all of your Callsign Certificates and Station Locations at once by
1.Directing TQSL to create a Backup File.
2.Copying the Backup File from the source computer to the destination computer.
3.On the destination computer, directing TQSL to restore Callsign Certificates, Station Locations, and Preferences from the copied Backup File.

Moving One Callsign Certificate to Another Computer
A Callsign Certificate (.tq6) file cannot be copied from one computer to another. Only a Certificate Container (.p12) file can be copied in this manner.
1.If you have not created a Certificate Container file for the Callsign Certificate you wish to move,
   1.aStart TQSL on the source computer.
   1.bOn the Callsign Certificates tab, click on the Callsign Certificate you wish to move, and then click the Save callsign certificate button.
   1.cIn the Enter the name for the new Certificate Container file dialog,
       1.c.1.Set Save in to C:\MyLotWCertificates
       1.c.2.Note the File name specified.
       1.c.3.Click the Save button.
   1.dIn the Certificate Container Password dialog, leave the New password and Enter again to confirm boxes empty unless you are using a shared computer, in which case you should specify the same password in both boxes.
   1.eIn the Click the OK button
2.Copy the Certificate Container file from C:\MyLotWCertificates on the source computer to C:\MyLotWCertificates on the destination computer.
3.On the destination computer, startTQSL and select the Callsign Certificate tab, which lists your Callsign Certificates.
   3.aClick the Load a Callsign Certificate button; in the Select Certificate file dialog that appears,
       3.a.1.Set Look in to C:\MyLotWCertificates
       3.a.2.Set the Files of type selector (on OS X, set the Enable selector) to Callsign Certificate container files (*.p12)
       3.a.3.Click on the Certificate Container file you copied in step 2.
       3.a.3.Click the Open button.
   3.bIn the Load Certificate file dialog, enter the password you specified when you created the Certificate Container file (if any), and click the Next button; the New Password dialog will appear.
   3.cIn the New Password dialog,
       3.c.1.If your computer is shared, specify a password in both textboxes; otherwise leave these boxes blank.
       3.c.2.Click the Ok button; the Load Certificate file dialog will display Loading complete.
   3.dIn the Load Certificate file dialog, click the Finish button.